Top 10 usual forklift crashes ， forklift procedure must take notice of these matters ！.

Top 10 usual forklift crashes ， forklift procedure must take notice of these matters ！.

Blog Article

Do not ignore the forklift at the office. If the procedure is bad, there will certainly be major accidents in mins, and there are lots of mishaps including forklifts.

Case 1: The forklift cargo obstructed the vehicle driver's view, and the individual in front might not be found, leading to a rolling crash.
Situation 2: In order to preserve the balance of the forklift when raising heavy goods, the employees used their body weight as the counterweight, which nearly triggered casualties.
Case 3: The size of the forklift cargo goes beyond the allowed size of the route and holds on the roadside shelf, which practically causes an accident.
Situation 4: Forklift is speeding and rolls over during a turn.
Instance 5: The forklift vehicle driver did not observe the pedestrian, and the pedestrian did not observe the forklift.
Case 6: The forklift raises the workers illegally, the forklift chauffeur does not wear the safety belt, the forklift lifter drops and the vehicle driver is crushed when the forklift surrender.
Situation 7: The forklift motorist did not use a seat belt and fell from the vehicle when it surrendered and was squashed.
Forklift procedure ought to pay attention to these matters ：.

Begin.
1. Before beginning, observe the surroundings, and after verifying that there are no barriers that prevent the security of driving, honk the horn first and after that start.
2. For automobiles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) scale have to be risk-free before starting.
3. When the forklift begins with a lots, the driver ought to initially validate that the load is secure and dependable.
4. The begin should be slow-moving and stable.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground should be kept at 300mm-400mm, and the mast should be tilted in reverse. .
2. Do not raise the fork too high when driving. When getting in and leaving the task website or while driving, take care that there will certainly be no challenges in the sky. When the tons is taking a trip, the fork needs to not be elevated expensive, which will certainly influence the security of the forklift. .
3. After unloading, the fork should be lowered to the normal driving position before driving. .
4. When turning, if there are pedestrians or cars nearby, the driving signal ought to be provided first. High-speed doglegs are banned. High-speed sharp turns will cause the vehicle to lose side security and topple. .
5. When the forklift is downhill, it is strictly forbidden to shut off the fire and slide, and it is prohibited to brake instantly while driving with loads unless there are unique conditions.
6. When the forklift is running, it has to obey the traffic rules in the manufacturing facility and have to maintain a certain safety and security distance from the lorry in front. .
7. When the forklift is running, the lots must remain in the most affordable position that does not hinder the driving, and the gantry must be properly tilted back. The tons shall not be increased except when stacking or filling. .
8. The height of the lots should not block the driver's sight. In special conditions, when the item impacts the forward vision, drive at a reduced rate when reversing.
9. It is restricted to activate the ramp, nor to drive throughout the ramp. .
10. The secure driving rate of the forklift in the factory area is 5 km/h, and it must drive securely at a reduced rate when getting in the manufacturing workshop area. .
11. When the forklift is lifted, raised or driven, it is prohibited for workers to stand on the fork to hold things and play a stabilizing role. .
12. If problems are discovered, they will be fixed and reported in a timely way, and they will certainly never operate with ailments or hide them.

loading and unloading.
1. When fork-loading things, the distance between both forks must be readjusted as required to make the lots of the two forks balanced and not manipulated, and one side of the product should be against the rack. .
2. It is prohibited to collaborate with a single fork or make use of a fork top or draw. In unique scenarios, security warning signs should be set up to remind surrounding pedestrians. .
3. In the process of packing and dumping items, the forklift has to be braked with the brake. .
4. The rate of the vehicle ought to be slow-moving and stable. Be careful not to roll the wheels on the dunnage, so as not to stretch the rolled things and hurt individuals. .
5. When using a fork to fork the goods, the fork should be as deep as feasible under the lots, and it ought to be noted that the fork idea ought to not touch other goods or items. The lots ought to be maintained with marginal back tilt of the gantry so that the load does not glide in reverse. The pole can be tilted onward slightly when the load is reduced to enable simple positioning of the load and removal of the forks. .
6. It is restricted to fork products at high speed and ram tough objects with the fork head. .
7. When the forklift is working, it is prohibited for individuals to loaf the fork, so as to stay clear of the collapse of the goods and hurt people. .
8. Overloading is restricted, and it is prohibited to utilize forks to lift personnel to engage in high-altitude operations to avoid high-altitude falling mishaps. .
9. It is not enabled to make use of the brake inertia to slide, place, round or roll objects. .
10. It is not allowed to use forks to pick, turn pallet discharge.

Leaving .
1. It is prohibited to leave the forklift when the products on the fork impend. Prior to leaving the forklift, you need to dump the goods or reduced the fork structure.
2. Draw the hand brake take care of to dead or dispirit the hand Electric Forklift Truck for Warehouse brake button.
3. The engine is switched off and the power is removed. (Except for unique conditions, such as the vehicle driver does not Electric Forklift Truck for Warehouse leave the lorry's view and does not go beyond 1 min).
4. Eliminate the secret. .

Forklift Operation Precautions.
1. Before and after the forklift operation, the appearance needs to be examined, and gas, lubing oil and cooling water ought to be added.
2. Examine the safety and security efficiency of starting, running and braking.
3. Check whether the lights and horn signals are full and reliable.
4. During the operation of the forklift, inspect whether the pressure and temperature level are typical.
5. After the forklift is running, the exterior leakage needs to additionally be inspected and the seals ought to be changed in time.

Forklift Safety Operation Specifications.
1. You have to inspect before leaving the vehicle;.
2. When you encounter a person before you during driving, you need to send out a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not surpass 5 km/h;.
4. When driving, the low point of the freight ought to be 0.3 m ~ 0.4 m in the air;.
5. The transforming ought to not be also sharp to avoid the tendency of " cost-free turning";.
6. Adding and down the slope should be sluggish and uniform, and no activating the slope is enabled.
7. Do not drive throughout the gradient. When the slope is higher than 10%, the vehicle must be driven backwards when declining;.
8. When the forklift personnel bring the goods and move forward, if they come across large or heavy items and go to the vehicle driver's line of vision, they need to take the reversing workout
.
The "Eight Prohibitions" should be complied with in the procedure.
1. Single fork operation is not permitted.
2. It is not allowed to raise the goods for cross country driving.
3. It is not allowed to get the goods by turning over the pallet with the fork.
4. It is not enabled to straight shovel chemicals, flammables and various other dangerous chemicals with forks.
5. It is not enabled to make use of inertia force to grab the goods.
6. It is not permitted to make use of stopping pressure to exile round or easy-to-roll items.
7. It is not permitted to bring individuals to deal with the pallet or fork, and it is strictly restricted to stand under the fork after the fork is elevated.
8. Do not drive laterally on slopes
.
Car park is not permitted under the following conditions.
1. Contours, slim roadways, train crossings;.
2. Sections with a longitudinal slope higher than 5%.
3. When there is an challenge on one side of the roadway, the contrary side of the area with the same length as the obstacle ought to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844